Crestron Electronics HD Scaling Auto-Switcher Extender 400
The Crestron® HD-MD-400-C-E delivers an incredibly simple and cost-effective multimedia presentation solution for classrooms and meeting spaces. It allows a laptop or mobile deviceto be connected to one of three inputs at a table or podium, and routes the signal to a display or projector up to 230 feet (70 meters) away. An additional AV source can be connected at the display device location or through an optional wall plate. Fully automatic operation detects when a source is connected or disconnected at any input and turns the display on and off, alleviating the need for any control panels or remotes. Built-in scaling ensures an optimal video image for SDand HD video signals, as well as for high-res computer signals.
Composed of a compact transmitter and receiver pair, the HD-MD-400-C-E installs in minutes and requires no special programming. The transmitter mounts beneath the table or inside the podium, while the receiver mounts behind the display or above the projector. The only connection required between the transmitter and receiver is a single CAT type twisted pair cable.A LAN port on the receiver allows for connection to an Ethernet network to enable easy setup and configurationvia a Web browser. Advanced functionality is enabled through integration with a Crestron control system.
Multimedia Computer/AV Auto-Switcher
The HD-MD-400-C-E handles high-definition video and computer sources with resolutions up to Full HD 1080p60, 1080i30, or WUXGA 1920x1200. Two HDMI® inputs, one VGA input, and one analog audio input are provided on the transmitter to support the connection of computers, mobile devices, and other media sources.An additional HDMI input is provided on the receiver, which may be wired to an optional wall plate or used to connect a Crestron AirMedia® wireless presentation gateway or other multimedia source installed permanently at the display device.
The inputs on each component can be configured to switch automatically or be controlled through a Crestron control system. Auto-detection on each input enables plug-and-play simplicity, supporting HDMI, DVI, or Dual-Mode DisplayPort signals via any HDMI input, and VGA, RGB, or component video via the VGA input.[2,3]The analog audio input works in tandem with the VGA input.
A single HDMI output if provided on the receiver to feed the display device. This output can support either HDMI or DVI signal types.A stereo analog audio output is also included to feed an optional sound bar or amplifier.
HD Signal Extender
A single CAT type cable (sold separately) links the HD-MD-400-C-E transmitter and receiver together. This cable can be up to 230 feet (70 meters) in length, offering an ideal signal extender solution for virtually any room with a single table or podium and one display device.
One might assume that any modern display device should support whatever sources you connect to it. In fact, many displays just can?t handle all the different formats and resolutions you?re likely to encounter day-to-day in a dynamic presentation environment. With its built-in professional scaler, the HD-MD-400-C-E enables support for a complete range of digital and analog signals, ensuring that every source displays reliably and beautifully.