Shure MX415WRLPDF/N 15" White Gooseneck Microphone
Part #: SHUMX415WRLPDFN | Mfg #: MX415WRLPDF/N
MX415WRLPDF/N: 15" White Dualflex Gooseneck Microphone, Light Ring
The MX415 surface mount version is a gooseneck microphone with a Bi-Color LED or light ring status display. It has a 15" gooseneck and is suitable for boardrooms and other sites where aesthetics are important.
FEATURES
- Gooseneck length: 15 inch / 38.1 cm
- Low profile, aesthetic design
- Wide dynamic range and smooth frequency response
- RF filtering with CommShield™ technology
- Status indicator: Bi-Color LED at gooseneck bottom or red light ring on gooseneck top
- Capsule options: None, Cardioid, Supercardioid
- Preamplifier Options
- MX400DP Desktop Base for MX405, MX410 and MX415 models
- MX890 Wireless Desktop Base for MX405, MX410 and MX415 models
- MX400SMP Surface Mount Preamp for MX405, MX410 and MX415 models
- MXW8: Wireless Desktop Base for MX405, MX410 and MX415 models
- ULXD8: Wireless Desktop Base for MX405, MX410 and MX415 models
Specifications
-
Type
-
Condenser (electret bias)
-
-
Frequency Response
-
50–17000 Hz
-
-
Polar Pattern (at 1 kHz)
-
MX415/C: Cardioid
-
MX415/S: Supercardioid
-
-
Output Impedance
-
EIA Rated at 150 Ω (170 Ω actual)
-
-
Output Configuration
-
Active Balanced
-
-
Sensitivity (at 1 kHz , open circuit voltage)
-
Cardioid: –35 dBV/Pa (18 mV)
-
Supercardioid: –34 dBV/Pa (21 mV)
-
1 Pascal=94 dB SPL
-
-
Maximum SPL (1 kHz at 1% THD, 1 kW load)
-
Cardioid: 121 dB
-
Supercardioid: 120 dB
-
-
Equivalent Output Noise (A-weighted)
-
Cardioid: 28 dB SPL
-
Supercardioid: 27 dB SPL
-
-
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz)
-
Cardioid: 66 dB
-
Supercardioid: 68 dB
-
-
Dynamic Range (1 kΩ load at 1 kHz)
-
93 dB
-
-
Common Mode Rejection (10 Hz to 100 kHz)
-
45 dB minimum
-
-
Preamplifier Output Clipping Level (1% THD)
-
-8 dBV (0.4 V)
-
-
Polarity
-
3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
-
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to pin 2 of output XLR connector.
-
-
Logic Connections
-
LED IN: Active low (≤1.0V), TTL compatible. Absolute maximum voltage: -0.7V to 50V.
-
LOGIC OUT: Active low (≤1.0V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 50V (up to 50V through 3kΩ).
-
-
Mute Switch Attenuation
-
-50 dB minimum
-
-
Environmental Conditions
-
Operating Temperature: -18–57 °C (0–135 °F)
-
Storage Temperature: -29–74 °C (-20–165 °F)
-
Relative Humidity: 0–95%
-
-
Power Requirements
-
48–52 Vdc phantom, 8.0 mA
-
Call the Audio Video experts at 1-888-881-0812 for more information. |